Horonobe Underground Research Laboratory Project Investigation Report for the 2022 Fiscal Year

Nakayama, Masashi

JAEA-Review 2023-032, 159 Pages, 2024/02

JAEA-Review-2023-032.pdf:19.37MB

The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant technologies for geological disposal of high-level radioactive waste through investigating the deep geological environment within the host sedimentary rocks at Horonobe Town in Hokkaido, north Japan. In the fiscal year 2022, we continued R&D on "Study on near-field system performance in geological environment", "Demonstration of repository design options", and "Understanding of buffering behaviour of sedimentary rock to natural perturbations". These are identified as key R&D on challenges to be tackled in the Horonobe underground research plan for the fiscal year 2020 onwards. Specifically, "full-scale engineered barrier system (EBS) performance experiment" and "solute transport experiment with model testing" were carried out as part of "Study on near- field system performance in geological environment". "Demonstration of engineering feasibility of repository technology" and "evaluation of EBS behaviour over 100C" were addressed for "Demonstration of repository design options". A study on "Understanding of buffering behaviour of sedimentary rock to natural perturbations" was also implemented in two areas, "evaluation of intrinsic buffering against endogenic and exogenic processes" and "development of techniques for evaluating excavation damaged zone (EDZ) self-sealing behaviour after backfilling". The Horonobe International Project (HIP) was initiated in February 2023 to promote research and development in collaboration with national and international organizations.

Progress status and future issues of development of analysis and estimation technology for fuel debris characterization, 5; Progress status of development of Non-Destructive assay technologies for sorting and segregation of fuel debris and others

Kamada, Masaki*; Yoshida, Takuma*; Sugita, Tsukasa*; Okumura, Keisuke

Nihon Genshiryoku Gakkai-Shi ATOMO, 66(2), p.83 - 86, 2024/02

https://doi.org/10.3327/jaesjb.66.2_83

no abstracts in English

Horonobe Underground Research Laboratory Project; Investigation program for the 2023 fiscal year

Nakayama, Masashi

JAEA-Review 2023-019, 70 Pages, 2023/11

JAEA-Review-2023-019.pdf:6.83MB

The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant technologies for geological disposal of high-level radioactive waste through investigating the deep geological environment within the host sedimentary rocks at Horonobe Town in Hokkaido, north Japan. In the fiscal year 2023, we continue R&D on "Study on near-field system performance in geological environment", "Demonstration of repository design options", and "Understanding of buffering behaviour of sedimentary rocks to natural perturbations". These are identified as key R&D challenges to be tackled in the Horonobe underground research plan for the fiscal year 2020 onwards. In the "Study on near-field system performance in geological environment", we conduct the coupled analysis on the full-scale engineered barrier system performance experiment and test the coupled simulation code through comparison with different simulation codes in the international DECOVALEX-2023 collaboration project. Borehole investigations are also carried out for solute transport experiments in the Koetoi Formation. As for "Demonstration of repository design concept", we carry out in situ experiments and data analysis on concrete deterioration under the subsurface conditions. Geophysical surveys are also carried out around an experimental tunnel to be newly excavated at the 350m gallery and characterise the initial conditions of the excavation damaged zone. For the "Understanding of buffering behaviour of sedimentary rocks to natural perturbations", we analyse the results of the hydraulic disturbance tests conducted in previous years and understand the relationship between rock stress / stress state and fault / fracture hydraulic connectivity. Concerning the construction and maintenance of the subsurface facilities, the 350 m gallery is extended and shafts are sank to a depth of 500 m.

Extraction of Se(iv) and Se(vi) from aqueous HCl solution by using a diamide-containing tertiary amine

Narita, Hirokazu*; Maeda, Motoki*; Tokoro, Chiharu*; Suzuki, Tomoya*; Tanaka, Mikiya*; Shiwaku, Hideaki; Yaita, Tsuyoshi

RSC Advances (Internet), 13(25), p.17001 - 17007, 2023/06

https://doi.org/10.1039/D3RA01341C

no abstracts in English

Chapter 5, Sodium-cooled Fast Reactor (SFRs)/ Chapter 12, Generation-IV Sodium-cooled Fast Reactor (SFR) concepts in Japan

Kubo, Shigenobu; Chikazawa, Yoshitaka; Ohshima, Hiroyuki; Kamide, Hideki

Handbook of Generation IV Nuclear Reactors, Second Edition, p.173 - 194, 2023/03

Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. JAEA contributes to Chapter 5; Sodium-cooled Fast Reactors (SFRs) and Chapter 12; Generation-IV Sodium-cooled Fast Reactor (SFR) concepts in Japan. Major characteristics and current technology developments including safety enhancement were described in Chapter 5. Chapter 12 shows design activities of SFR. Innovative technology developments, and update of the Japan sodium-cooled fast reactor design with lessons learned from the TEPCO Fukushima Daiichi NPP accident.

Development of genetic and electrochemical diagnosis and inhibition technologies for invisible corrosion caused by microorganisms (Contract Research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; National Institute for Materials Science*

JAEA-Review 2022-045, 82 Pages, 2023/01

JAEA-Review-2022-045.pdf:4.6MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Development of genetic and electrochemical diagnosis and inhibition technologies for invisible corrosion caused by microorganisms" conducted in FY2021. The present study aims to develop innovative diagnostic techniques such as accelerated test specimens and on-site genetic testing for microbially induced and accelerated corrosion of metallic materials (microbially influenced corrosion, MIC), and to identify the conditions that promote MIC at 1F for proposing methods to prevent MIC through water quality and environmental control. We also aim to develop a research base based on materials, microorganisms, and electrochemistry, to develop technologies that can be used by engineers in the field, …

Horonobe Underground Research Laboratory Project; Investigation report for the 2021 fiscal year

Nakayama, Masashi

JAEA-Review 2022-025, 164 Pages, 2022/11

JAEA-Review-2022-025.pdf:12.25MB

The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA). The main aim of this project is to enhance the reliability of relevant disposal technologies for geological disposal of high-level radioactive waste through a comprehensive research and development (R&D) program in the deep geological environment within the host sedimentary rock at Horonobe in Hokkaido, north Japan. In fiscal year 2021, we continued R&D on three important issues specified in the "Horonobe Underground Research Plan from Fiscal Year 2020", which involve "Study on near-field system performance in geological environment", "Demonstration of repository design options", and "Understanding of buffering behaviour of sedimentary rock to natural perturbations". Specifically, "full-scale engineered barrier system (EBS) performance experiment" and "solute transport experiment with model testing" were carried out as part of "Study on near-field system performance in geological environment". "Demonstration of engineering feasibility of repository technology" and "evaluation of EBS behaviour over 100C' were addressed for "Demonstration of repository design options". A study on "Understanding of buffering behaviour of sedimentary rock to natural perturbations" was also implemented in two areas, "evaluation of intrinsic buffering against endogenic and exogenic processes" and "development of techniques for evaluating excavation damaged zone (EDZ) self-sealing behaviour after backfilling". The results of the R&D, along with those obtained in other departments of JAEA, will reinforce the technical basis for both repository implementation and safety regulation. For the sake of this, we will steadily proceed with this project in collaboration with relevant organizations and universities both domestically and internationally and also widely publish the plans and results of the R&D to ensure their transparency and technical reliability.

Aerosol characterization during heating and mechanical cutting of simulated uranium containing debris; The URASOL project in the framework of Fukushima Daiichi fuel debris removal

Porcheron, E.*; Leblois, Y.*; Journeau, C.*; Delacroix, J.*; Molina, D.*; Suteau, C.*; Berlemont, R.*; Bouland, A.*; Lallot, Y.*; Roulet, D.*; et al.

Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR2022) (Internet), 5 Pages, 2022/10

One of the important challenges for the decommissioning of the damaged reactors of the Fukushima Daiichi Nuclear Power Station (1F) is the fuel debris retrieval. The URASOL project, which is undertaken by a French consortium consisting of ONET Technologies, CEA, and IRSN for JAEA/CLADS, is dedicated to acquiring basic scientific data on the generation and characteristics of radioactive aerosols from the thermal or mechanical processing of fuel debris simulant. Heating process undertaken in the VITAE facility simulates some representative conditions of thermal cutting by LASER. For mechanical cutting, the core boring technique is implemented in the FUJISAN facility. Fuel debris simulants have been developed for inactive and active trials. The aerosols are characterized in terms of mass concentration, real time number concentration, mass size distribution, morphology, and chemical properties. The chemical characterization aims at identifying potential radioactive particles released and the associated size distribution, both of which are important information for assessing possible safety and radioprotection measures during the fuel debris retrieval operations at 1F.

Mechanical property evaluation with nanoindentation method on Zircaloy-4 cladding tube after LOCA-simulated experiment

Kakiuchi, Kazuo; Yamauchi, Akihiro*; Amaya, Masaki; Udagawa, Yutaka; Kitano, Koji*

Proceedings of TopFuel 2022 (Internet), p.409 - 418, 2022/10

Development of the sintering solidification method for spent zeolite to long-term stabilization (Contract research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Shibaura Institute of Technology*

JAEA-Review 2022-008, 116 Pages, 2022/06

JAEA-Review-2022-008.pdf:5.36MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of the sintering solidification method for spent zeolite to long-term stabilization" conducted from FY2018 to FY2021 (this contract was extended to FY2021). Since the final year of this proposal was FY2021, the results for four fiscal years were summarized. The present study aims to develop a new sintering solidification method in which glass is added as a binder to spent zeolite which is adsorbed radionuclides such as Cs and the nuclides are immobilized by sintering them. In this project, the optimum conditions for sintering solidification and the basic performance of the sintered solidified body will be evaluated by cold tests, and they will be demonstrated by hot tests.